Welcome to our website!

Frequency Dividers

Precision Test Systems manufacturers' various divider boards as options to its range and frequency standards and distribution amplifiers. 

A new option will soon be available as a stand alone module called the MDS10-50.

The MDS10-50 is a synchronization and divider or multi-divider module.

It takes a 10 MHz frequency (other input frequencies available upon request) such as available from a frequency standard and divides the 10 MHz to the following frequencies.

10 MHz, 5 MHz, 1 MHz, 100 kHz, 10 kHz, 1 kHz, 100 Hz, 10 Hz, 1 Hz, 1 PPM (pulse per minutes), 1 ppH (pulse per hour).  There are four complementary outputs at each frequency making 88 outputs in all.

All outputs are TTL compatible and can also drive twisted pair or parallel transmission lines.

Further more, all outputs can be synchronized to an external 1 pps (pulse per second) input such as available from a GPS receiver.  The synchronization can either be on the rising edge or the falling edge of the 1 pps signal.

Every output will be synchronized to the 1 pps input to within 250 ns or better.

This board can be fitted into the following products: