Home

Site Map    FAQ

Support

Full Brochure List
Distribution Amplifiers
Field Strength Meters
Frequency Counters
Frequency Dividers
Frequency Standards
Function Generator
GPS Amplifier/Splitter
GSM Products
Misc. Products
Multimeter 6.5 digit
Oscillators
Phase Noise Testing
Power Amplifiers
Power Supplies
Protek Products
Redundant Systems
Rubidium Oscillators
Signal Generators
Spectrum Analyzers
Timing Systems
UMTS / GSM Tester
 

GSM Remote Control and Alarm System

 
                         
 
   

The GSM2x8 is a GSM Remote Control and Alarm Module.  It allows you to use a normal GSM mobile phone to monitor and control an alarm or remote station by sending and receiving text or sms messages.

Features:

  • Eight Alarm logic Inputs.  If any input is triggered a text (sms) is sent to a pre-designated mobile phone number.
  • Eight relays.  Any relay can be closed by sending a text to the unit
  • Mobile phone can read digital input status
  • Up to eight different mobile phones numbers can be stored in the system.
  • Password protected.  Prevents unauthorised use.
  • Also any other mobile phone can communicate with the system as long as the password is known by that phone.
  • Each logic input can be assigned to one or more phones.
  • Built in GSM quad band telephone modem.
  • Can be set up and programmed from any GSM phone located anywhere in the world (GSM must be available in that country)
  • IP65 enclosure.
  • Only extra item needed is a standard SIM card obtainable from your service provider, or from Precision Test Systems.

Logic Inputs

The GSM2x8 continually monitors eight logic inputs.  If any logic input changes, the GSM2x8 will send a text  to a pre-designated GSM mobile phone indicating what one of the logic inputs has been triggered.

Alternatively any mobile phone can call the unit and read the digital inputs.  The device is password protected, so only authorised uses can access the system.

Relays

Eight normally open relays can be independently switched by sending a text.  Or the unit can be programmed so that one relay is automatically activated from a logic input.

Applications

The GSM2x8 has multiple uses including:

  • Alarm System.  Automatic notification to your mobile phone, when an  alarm is raised.
  • Vending Machine
  • Pumping Stations
  • Buildings and Real Estate
  • Weather Stations
  • River Monitoring and Flood Control
  • Transport and Vehicle monitoring.

Benefits

  • More flexible than paging systems
  • Low set up and running costs
  • Faster response to alarms and process disturbances.
  • Allows reduced manning levels
  • Provides more detailed information
  • Allows full remote control

General

The GPS2x8 is housed in a IP65 rated case.  An optional LCD shows status of the system. 

The GPS2x8 is powered from 90-260 VAC, or +12V AC or DC.  An internal battery powers the unit if the primary power fails for a short period.

A GSM Antenna is supplied as standard.  Alternatively an optional remote antenna can be connected for areas with poor reception.

Connect Precision Test Systems for more details and a price quote.